Go-Kart

Does everything and more.

Like it’s name sake the Go-Kart is super fast, agile and designed for fast acceleration and cornering.

Our team riders tested this in all conditions from windy and waist high to overhead and hollow. It’s a board that does everything and more - airs, turns, barrels and still with a bit of float to skate on the weaker days.

If you’re looking for a board that surfs like a shortboard but without the limitations of a normal shortboard, this is for you.

Dimensions

ACT
5’10 x 20” x 2 1/2” - 31.9 ltr
6’2 x 20 1/2” x 2 3/4” - 37.3 ltr
6’6 x 21 1/2” x 2 7/8” - 43.9 ltr
TEC
5’8 x 19 1/2” x 2 3/8” - 29.3 ltr
5’10 x 20” x 2 1/2” - 31.9 ltr
6’0 x 20 1/4” x 2 5/8” - 34.9 ltr
6’2 x 20 1/2” x 2 3/4” - 37.3 ltr
6’4 x 21” x 2 7/8” - 41.8 ltr
6’6 x 21 1/2” x 2 7/8” - 43.9 ltr
6’8 x 21 3/4” x 3” - 47.5 ltr

 

ACT

ACT

Usually you can have strength, light weight or a good price. In ACT, you can have all three.

ACT boards have a super strong 2 x 4oz + Bamboo reinforcement on the deck and a 6oz + 4oz lay-up on the bottom, but they weigh around the same as a light glassed PU board.

Most importantly; they respond better. The feel of these boards is like no other surfboard - they are incredibly responsive. The unhindered flex and zero dead weight means all of the energy that you put through your feet is delivered into the turn with none of the ‘deadening’ effect from the resin.

TEC

TEC - TORQ EPOXY COMPOSITE

Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.

The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.

The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.