MOBY FISH

“Over 20 years ago I made the first Moby. I had ridden fishes in the early 70’s. I wanted to revisit the glide and speed of a fish. The first Moby I built, 1999, was 7’10 22.5 3.1. Volume? No idea. No matter.

It did the job in smaller surf and I rode it on some bigger days. I was quite happy with it. It made the cut on the 2 or 3 board quiver I kept in the back of my truck.”

Rusty Preisendorfer

The Moby FIsh is available in Torq ACT and TEC construction.

Dimensions
ACT  
6’8 x 21.38” x 2.59” - 42.4 ltr
7’4 x 22.5” x 2.99” - 56.7 ltr
   
TEC  
6’8 x 21.38” x 2.59” - 42.4 ltr
7’0 x 22” x 2.75” - 48.7 ltr
7’4 x 22.5” x 2.99” - 56.7 ltr
7’8 x 23” x 3.31” - 67.2 ltr
8’0 x 23.25” x 3.25” - 69.9 ltr

 

ACT

ACT

Usually you can have strength, lightweight or a good price. In ACT, you can have all three.

The Rusty ACT shortboard lay-up spec has a 3 layers of fiber on the deck and 6oz rail band in the tail. On the bottom a 6oz + 4oz lay-up, plus UD carbon strips top and bottom. But they weigh around the same as a light glassed PU board.

Most importantly; they respond better. The feel of these boards is like no other surfboard - they are incredibly responsive. The unhindered flex and zero dead weight means all of the energy that you put through your feet is delivered into the turn with none of the ‘deadening’ effect from the resin.

TEC

TEC - TORQ EPOXY COMPOSITE

Torq Epoxy Composite offers performance shapes in our state-of-the-art epoxy layup. These boards have the best balance of Lightweight versus Durability. Using our own unique lamination process, we are able to use a very strong fiberglass lay-up of 6oz and 4oz combined in 3 layered deck and 2 layered base (with a 4 layered rail lap) with a high density EPS foam, but still achieve a board weight that matches a lightweight fiberglass lay-up.

The result is light but very strong board, with good flex characteristics and as with all torq's, excellent value for money.

The TEC shortboards have 2 full layers of fiber over the deck and bottom. On the deck we use an extra 6oz deck patch with gives triple layer ding resistance, but doesn't resist the flex along the rail. The addition of a carbon filament stringer and UD carbon twin strips on the base makes these super springy and responsive.